'In Stock' items typically ship 1- 5 business days after order. 

KX3:

KX3 Transceiver and Accessories

The KX3, MH3, KXFL3, KXAT3, KXPD3 all ship together.

In Stock -All new KX3 orders ship in 2-5 business days.

KX3-PCKT KX3 Accessory Cable Set

In Stock

KXBC3 Internal NiMH Charger with Real-Time Clock

In Stock

If you have a KXBC3 on backlog and have not been contacted by us to confirm the order, please contact sales@elecraft.com . We have a small number of customers we have not been able to reach via email.

KXFL3 dual-Passband Roofing Filter

In Stock

KXAT3 Internal, 20-W Automatic Antenna Tuner

In Stock

KXPD3 Precision Iambic Keyer Paddle

In Stock

MH3 Hand Microphone for the KX3 with Up/Dn Buttons

In Stock

KXPA100 100W external amplifier for the KX3 and other rigs.

In engineering development and test. 

Estimated shipping date Q2.

KAT500:

KAT500 High Power Auto-Tuner

We are now shipping KAT500s within 2-5 business days after order receipt. 

If you have a KAT500 on backlog and have not been contacted by us to confirm the order, please contact sales@elecraft.com . We have a small number of customers we have not been able to reach via email.

KPA500:

KPA500 Automatic Solid State Amplifier

Shipping in 1 to 5 days. 

P3: 

P3 Panadapter for the K3 (and other rigs).   

P3-SVGA Adapter (Now in Field Test.)

In Stock

In Stock

K3/0  K3 Remote

K3/0

Shipping in 2 to 5 days

.

RemoteRig Set (RRIGSET)

In Stock

K3:

K3/10 and K3/100 HF+6M Transceivers (Kit and Assembled)

In Stock 

K3 kit orders are shipped 1-3 business days after the order is received.

K3-F (factory assembled) orders are are custom built to order with your specific options and ship 3-5 business days  after the order is received.

KRX3  (2nd Receiver Option)

In Stock 

KDVR3 (Digital Voice Recorder Option)

In Stock

K144XV 2M Internal Option for the K3

In Stock

PR6 Low Noise 6M Pre-Amp

Shipping in 10 - 14 days

K3DSPUPGD  Revision D DSP Upgrade swap-out where you send us your DSP after we send you an upgraded DSP. Adds lower frequency RX & TX response (below 300 Hz) and LPF roll-off above 4 kHz that significantly reduces high frequency artifacts and eases listening fatigue. (Also ships on all new K3s)

In Stock

We offer this upgrade as a swap out with a factory upgraded DSP board to minimize your down time. (We first ship an upgraded DSP to you and you then return your old one to us.) 

As an alternative, you can send in your DSP and we will upgrade it. Typical turn around time is 2-5 days, plus shipping. Contact sales@elecraft.com for return authorization if you would like to use this alternate path for the DSP upgrade.

(Included as part of the full K3 DSPUPGD, above.)

In Stock

K2:

K2: HF Transceiver Kit

In Stock

K60XV: 60M and Transverter Adapter

In Stock

KPA100: K2/100 Internal Integration kit. Completes your K2 as a K2/100.

In Stock

KAT100: 100W External Automatic Antenna Tuner for the K2 and K2/100.

In Stock

KSB2:  K2 SSB Module

In Stock

KNB2:  K2 Noise Blanker

In Stock

KBT2:  Internal K2 Battery Kit (with Battery)

In Stock

KBT2-X:  Internal K2 Battery Kit (w/o Battery)

In Stock

K160:  160M / 2nd RX Antenna port

In Stock

KAT2:  Internal 20W ATU for the K2

In Stock

KIO2: AUX I/O RS-232 and control signal interface for the K2

In Stock

FWK2: Firmware Upgrade for the K2

In Stock 

EC2 : Blank Hobby Enclosure - Matches K2 case (same size)

In Stock

ETS2: Tilt Stand for EC2

In Stock

KDSP2: Advanced DSP for the K2

In Stock

KAF2: Internal Audio Filter / Real Time Clock for the K2

In Stock

K2 Temp. Compensated PLL Upgrade - E850138

In Stock

KPA100MODKT

In Stock

KPA100UPKT

In Stock

BFO MOD KIT for the K2

In Stock

EC2 Project Enclosure

In Stock

K2BCOMPKT

In Stock

Finger Dimple

In Stock

KHEXKEY (Elecraft Hexkey)

Discontinued

MH2 Microphone 

In Stock

PROSET-K2 Boom Headset for the K2, K3 (Heil)

In Stock

K1:

K1-4: Four Band CW Transceiver Kit and accessories.

In Stock

K1-2: Two Band CW Transceiver Kit and accessories.

In Stock

KFL1-4:  Additional Four Band Module for the K1 (Includes 40,30,20,17 and 15M parts. You pick 17M or 15M at build time.)

In Stock

KFL1-2: Additional Two Band Module for the K1 (specify bands)

In Stock

K1B80, K1B40, K1B30, K1B20, K1B17, K1B15 

80, 40, 30, 20, 17 and 15M Band kits for the K1-2 or KFL1-2

In Stock 

KTS1 Wide Range Tilt Stand for the K1

In Stock

KNB1 Noise Blanker for the K1

In Stock

KAT1 Internal ATU for the K1

In Stock

KBT1 Internal Battery Adapter for the K1

In Stock

EC1 Matching K1 Project Enclosure

Discontinued

K1BKLTKIT K1 LCD Backlight Kit for K1

In Stock

KX1:

KX1: Ultra-Portable CW Transceiver Kit (and accessories).

In Stock

KXB3080: 30M and 80M adapter for the KX1

In Stock

KXPD1: Plug-in keyer paddle

In Stock

KXAT1: Internal Automatic Antenna Tuner

In Stock

XG3 RF Signal Source (1.5 MHz through 1400 MHz)

In Stock

T1:

T1-K ATU (kit)

In Stock

T1-A ATU (assembled)

In Stock

T1-FT817 Adapter Cable (assembled)

In Stock

XVs:

XV50:     50 MHz Transverter for the K2 and most HF rigs

Shipping after May 1

XV144: 144 MHz Transverter for the K2 and most HF rigs

In Stock

XV222: 222 MHz Transverter for the K2 and most HF rigs

In Stock 

XV432: 432 MHz Transverter for the K2 and most HF rigs

In Stock

XVOVN: High Stability Crystal Oven

In Stock

HIACC432: High Accuracy L.O. Crystal for XV432

In Stock 

Mini-Modules:

CP1

In Stock

XG2

In Stock

2T-gen

In Stock

N-gen

In Stock

DL1

In Stock

BL2

In Stock

W1

In Stock

XG3:

XG3 RF Signal Source 1.5-200 MHz with calibrated output levels: -107, -73, -33 and 0 dBm. Rich in harmonics to 1400 MHz

In Stock

W2:

W2 HF/VHF/UHF External Wattmeter

In Stock 

KRC2:

KRC2:  Antenna switch band decoder for the K2 and most other HF rigs

See our manual download page for the KRC2 and KRC2ACC Manuals.

In Stock

KRC2ACC and KRC2ACCMDKT: CW Feedback Version of KRC2

In Stock

Buddipole Antennas:

DBP  Deluxe Buddipole Antenna Package

In Stock

DBS  Deluxe Buddistick Antenna Package

In Stock